10 Free Samples • 2-Day Rush $5

Financing Available

Fit Or Free Guarantee

Free Shipping

60-Day Satisfaction Guarantee

Blindster
AccountCart

Product Information

For more than 25 years, the design of virtually all horizontal blinds has remained unchanged. Traditional blinds have route holes in the middle of the slats and do not close completely flat, resulting in light seepage and reduced privacy.  "Routeless" slat designs can cause the slats to become dislodged, requiring constant adjustment. That's all in the past with our new 2" Deluxe Faux Wood Blinds! There is an offset route hole on the slats that holds them in place but disappears when the slats are closed. The slats can then close tightly against each other, dramatically reducing the amount of indirect light entering the room. The faux wood material is moisture resistant, making these blinds perfect for bathrooms, kitchens, and other humid locations, Add in cordless lift that's standard with every blind, and you've got a real game changer in your windows!

Get to know this blind:

  • Patented slat design features offset hidden route holes for maximum privacy and light blocking
  • Easily raise and lower the blind with cordless lift, and sculpted wand tilts the slats open and closed – no dangling cords
  • Custom-made, sized to your exact specifications

Why you'll love this blind:

  • Budget-friendly blind that is packed with great features – save money and still get an amazing blind!
  • Patented close-flat design blocks more light for dimmer rooms when needed, and better privacy versus typical horizontal blinds
  • Standard integrated headrail design is standard for a contemporary valance-free look
  • Upgrade to the 3 1/4" Crown Valance option for a more traditional design
  • Moisture resistant and easy to clean – perfect for anywhere in the house including kitchens and bathrooms
  • Best for Kids™ certified for safe operation in homes with small children

Key considerations:

  • Inside-mount blinds are "top-mount" only (brackets cannot be installed on the sides of the window casement)
  • Blind height may be up to 2 1/4" longer than ordered height
  • Are your windows too large for this blind? Try our 2" Premium Cordless Faux Wood Blind, available in extra-wide and extra-long sizes

Great for:Living RoomBedroomOfficeKitchenDining RoomMedia RoomBathroomEntry WayUtility Room

  • Water Resistant
  • Easy to Clean
  • Child & Pet Safety

Made to order, ships in 7–9 business days. Once shipped, delivery typically takes 5 business days, depending on your location.

Specifications & Restrictions

Width
17 1/2" – 96"
Height
24" – 96"
Min Depth for Inside Mount

1 ½ inches (No Valance) & 1 5/8 inches (With Valance)

Depth Required for Flush Mount

2 7/8 inches (No Valance) & 4 1/8 inches (With Valance)

Min Flat Space for Outside Mount

2 1/8 inches

Inside Mount Width Deduction (Headrail and Blind)

3/8 inch

Valance Height

3 ¼ inches

Headrail Size

2 ¾ inches x 1 7/8 inches

Bottom Rail Size

1 ¾ inches x ¾ inch

Outside Mount Valance Returns (Side Pieces)

3 9/16 inches

Restrictions

  • Tilt Wand is Color Coordinated and on the left hand side only
  • Inside mount is top mount only, Outside mount is top or surface mount only.
2 Inch Deluxe Cordless Faux Wood Blinds dimensions diagram

How to Measure

How to Measure: Inside Mount

3 min read

Let's make sure an inside mount will work for your window!  Using a metal tape measure, first check if you have sufficient depth:

  • Measure inside the window opening from the back of the window to the front of the opening where the blind would mount. The depth at the top of the window must be at least 1 5/8" to mount the brackets. To have a flush mount (meaning the blind is fully recessed in the window opening) the depth must be at least 2 7/8" without a valance and 4 1/8" with a valance. If your depth is not sufficient for mounting the brackets, please see our outside mount instructions or consider a different product.

How to Measure:

Let's start with the Width:

  • Measure inside of the window opening/frame from left to right to the nearest 1/8" at three places: at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8".  That is your ordering width.

Now, let's do the Height:

  • Measure the inside of the window opening/frame from the top of the opening to the bottom of the opening/sill to the nearest 1/8" in three places: on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the shortest. That is your ordering height.

Note: Always provide us with the actual measurement of the window opening. We will make the necessary deduction of approximately 3/8" to your blind's width to allow room for installation and for proper movement of the blind within the window opening. No deductions will be made to your height. Blind height tolerance may vary up to +2 1/4".

How to Measure: Outside Mount

3 min read

Before you start measuring, decide where above your window opening you want to mount your blind. You will need at least 2 1/8" of flat vertical space above the window to mount the brackets. The blind can be installed directly above the window opening, or higher up to give the appearance of a larger window and to have more clear space in the window when the blind is raised. 

If you have trim around the window, you can mount the blind above the trim, directly on the trim (if you have the required minimum flat space for the brackets), or to the sides of the trim if you do not enough mounting space above the window or on the trim itself. See the directions below for how you'd like to install your blind.

If you do not have sufficient vertical space for mounting the brackets, please see our inside mount instructions or consider a different product.

Width:

  • Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the blind extends about 2" on each side of the window opening for the best light control and appearance. 
  • Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.

Height: 

  • Consider how far above the window you would like to install your blind but at least starting with the minimum vertical space referenced above. The blind can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the blind is raised. 
  • Measure from the top of where you will mount the blind on the wall down to where you want the bottom of the blind to be, using the same extra space below your window opening as you used above; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height. No deductions will be made to your ordering height, but the blind height tolerance may vary up to +2 1/4".

Width:

  • Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the blind extends about 2" on either side of the window opening for the best light control and appearance. You can also choose to have the blind the same width as your window trim.
  • Using a metal tape measure, measure from left to right including any desired extra space on each side of the window—that is your ordering width.

Height: 

  • Consider how far above the window you would like to install your blind but at least starting with the minimum vertical space referenced above. The blind can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the blind is raised.
  • Measure from the top of where you will mount the blind on the wall down to where you want the bottom of the blind to be, using the same extra space below your window opening as you used above, or to the bottom edge of the trim if you prefer; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height. No deductions will be made to your ordering height, but the blind height tolerance may vary up to +2 1/4".

Width:

  • Confirm that the height of your trim is at least the minimum height required for installing the mounting brackets. At the top of your window, use a steel measuring tape and measure from outer edge to outer edge of the trim.  That is your ordering width.

Height: 

  • Measure from the top of your trim to the bottom of your trim or to the top of the windowsill if you have a protruding sill. That is your ordering height. No deductions will be made to your ordering height, but the blind height tolerance may vary up to +2 1/4".

Width:

  • Using a metal tape measure, measure left to right from the outside edge of the trim piece that goes around the glass to the other outside edge. That is your ordering width. However, if you have space, it is best to order the blind about 2" wider for better light control.

Height:

  • Consider how far above the window trim piece you would like to install your blind but at least starting with the minimum vertical space referenced above. Measure down to where you want the bottom of the blind to be, using the same extra space below the window trim piece as you used above. That is your ordering height. No deductions will be made to your ordering height, but the blind height tolerance may vary up to +2 1/4".

Note: We carry complimentary hold-downs (door brackets) which can be requested during the ordering process. These should be installed for a successful door mount as they secure the blind at the bottom of the door so that it does not swing when the door opens and closes.  

How to Install

How to Install: Inside Mount

Let's make sure you have what you need!    

What came with your blinds?  

  1. Mounting brackets
  2. 1 ¼" Mounting screws (two per bracket)
  3. One valance with valance clips*
  4. One tilt wand

What else will you need in order to complete the installation?  

  1. Rechargeable drill with ¼" hex bit
  2. Phillips screwdriver
  3. Pencil
  4. Tape measure
  5. Ladder

*If applicable to your order.

 

Download the PDF below for a complete step by step guide on how to install your inside mount blinds. 

Download printable instructions (PDF) (opens in a new tab)

How to Install: Outside Mount

Let's make sure you have what you need!  

What came with your blinds?

  1. Mounting brackets
  2. 1 ¼" Mounting screws (two per bracket)
  3. One valance with two side pieces and valance clips*
  4. Two hold-down brackets*
  5. 5/8" hold down screws (two per hold down bracket)*

What else will you need in order to complete the installation?

  1. Rechargeable drill with ¼" hex bit
  2. Phillips screwdriver
  3. Pencil
  4. Tape measure
  5. Ladder

*If applicable to your order. 


Download the PDF below for a complete step by step guide on how to install your outside mount blinds. 

Download printable instructions (PDF) (opens in a new tab)

Learn More About Our Faux Wood Blinds

The Perfect Window Treatments

Elevate your space with 2-inch faux wood blinds cordless options that provide both style and functionality. These durable, long-lasting window coverings are ideal for controlling light and privacy with ease. Featuring a modern, valance-free design, these faux wood blinds are perfect for inside mount installations, offering a clean, sleek look. The cordless lift and wand tilt provide a simple way to raise, lower, and adjust the slats for the perfect light control and clear view.

Benefits of Faux Wood Blinds

Our faux wood blinds combine the beauty of real wood with the practicality of moisture resistance, making them perfect for areas like bathrooms. These window treatments are designed to resist warping, ensuring lasting durability. The wide range of colors, from light gray to chestnut, allows you to select the ideal shade to complement your style. With 2-inch slats, these wood blinds offer an excellent balance of privacy and natural light filtering.

Cordless Faux Wood Blinds: Safe and Convenient

For families with kids, these cordless faux wood blinds offer a safe solution by eliminating cords. The innovative tilt wand gives you full control over the slats, ensuring your space is stylish, private, and light-filled without the safety concerns. These blinds are custom-made to measure, guaranteeing a perfect fit for your window dimensions, including minimum height and width requirements.

Simplicity and Style in Every Room

Faux wood blinds offer a practical alternative to real wood, providing all the elegance with none of the maintenance issues. Available in various colors, these blinds enhance the beauty of any room while offering unmatched control over light and privacy. Whether you choose a light shade to brighten a room or a darker tone for a cozier feel, these blinds will fit perfectly into any room, making them a smart choice for your home or office.

Videos

  • Product Expert Review - 2 inch Deluxe Cordless Faux Wood Blinds

  • Install and Enjoy! Blindster 2 Deluxe Cordless Faux Wood

  • Perfect!

  • How to Measure for Inside Mount Blinds

  • How to Measure for Outside Mount Blinds

  • How to Install Blindster Deluxe Cordless Faux Wood Blinds

  • How They're Made - Faux Wood and Wood Blinds

Reviews

4.7

Based on 3,861 reviews

  • Michael

    Received the blinds as expected. They fit perfectly and I was able to install them in about 1/2 hour as the connection points were different than my previous blinds. Very happy with the product.

  • Jacob

    Just as described. Nice quality.Easy to mount. I will use Blindster again.

  • Daniel

    We are very happy with the blinds. Very easy to install. My only concern is the wand isn't long enough.

  • Jessica

    These turned out so great- very easy to install and we love them!

  • Laura

    Blinds arrived on time, were easy to install and fit perfectly!

  • Robert

    Easy to install, looks great. Very happy with this. Planning on purchasing another unit.

  • Toni

    Prompt shipping thanks

  • Lois

    we have ordered before, and did a new order, and ordered the wrong kind/size by mistake! customer service was SO HELPFUL AND ORDERED NEW BLINDS FOR US IN THE CORRECT SIZE AT NO CHARGE!!! who does that??? we thanked her profusely and donated the wrong blinds to charity... what a fabulous company with such great morals and practices! good for you folks, that's getting scarcer and scarcer in this world :-)

  • Steve

    Looks great, easy lift and pull down.

  • Stephen

    perfect measurements, shipped on time, no damaged boxes, and blinds were east to install and look great with quaility. SteveH