LEVOLOR 2 Inch Classic Value Faux Wood Blinds

Width:

• Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the blind extends about 2" on each side of the window opening for the best light control and appearance. 
• Using a metal tape measure, measure from left to right including your desired extra space on each side of the window—that is your ordering width.

Height: 

• Consider how far above the window you would like to install your blind but at least starting with the minimum vertical space referenced above. The blind can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the blind is raised. 
• Measure from the top of where you will mount the blind on the wall down to where you want the bottom of the blind to be, using the same extra space below your window opening as you used above; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.

Width:

• Looking at your window and surrounding wall, decide what area you would like to cover. We recommend the blind extends about 2" on either side of the window opening for the best light control and appearance. You can also choose to have the blind the same width as your window trim.
• Using a metal tape measure, measure from left to right including any desired extra space on each side of the window—that is your ordering width.

Height: 

• Consider how far above the window you would like to install your blind but at least starting with the minimum vertical space referenced above. The blind can be positioned higher up to give the appearance of a larger window and to have more clear space in the window when the blind is raised. 
• Measure from the top of where you will mount the blind on the wall down to where you want the bottom of the blind to be, using the same extra space below your window opening as you used above, or to the bottom edge of the trim if you prefer; if you have a protruding windowsill, measure down to the top of the sill. That is your ordering height.

Note: We provide complimentary spacer blocks upon request. These go behind the installation brackets to position the blind away from the wall and prevent the blind from hitting the frame. Spacer blocks add an additional 3/8" of depth for installation. Note that the valance returns (the side pieces that wrap around the headrail) will be made 3/8" longer when requesting spacer blocks.

Width:

• Confirm that the height of your trim is at least the minimum height required for installing the mounting brackets. At the top of your window, use a steel measuring tape and measure from outer edge to outer edge of the trim.  That is your ordering width.

Height: 

• Measure from the top of your trim to the bottom of your trim or to the top of the windowsill if you have a protruding sill. That is your ordering height.

Width:

• Using a metal tape measure, measure left to right from the outside edge of the trim piece that goes around the glass to the other outside edge. That is your ordering width. However, if you have space, it is best to order the blind about 2" wider for better light control.

Height:

• Consider how far above the window trim piece you would like to install your blind but at least starting with the minimum vertical space referenced above. Measure down to where you want the bottom of the blind to be, using the same extra space below the window trim piece as you used above. That is your ordering height.

Note: We carry complimentary hold-downs (door brackets) which can be requested during the ordering process. These should be installed for a successful door mount as they secure the blind at the bottom of the door so that it does not swing when the door opens and closes.